Coverage You Can Prove
Per-room and per-shelf history shows temperature across the whole space, not one probe.
Wireless sensors across cold rooms and chillers send readings over LoRa or BLE. IoTServa keeps the history and warns when a sensor goes quiet, not only when a room warms.

A cold room is only protected if its sensors are alive. Batteries fade, doors block signal and a silent sensor looks the same as a stable one until a loss occurs.
Per-room and per-shelf history shows temperature across the whole space, not one probe.
Missing readings, low battery and weak signal raise alerts of their own.
Excursions notify the right person first and escalate when nobody responds.
Temperature history is exportable for food-safety and quality audits.
Each one is read natively and joins the same tag model.
Receive LoRaWAN uplinks through your gateways, decode payloads into engineering units, and manage thousands of low-power sensors.
See LoRa IntegrationScan advertisements and read GATT services through BLE gateways, to track assets, rooms and short-range sensors.
See BLE IntegrationPoll Modbus RTU and Modbus TCP devices, decode registers with the right word order and scaling, and publish clean engineering values.
See Modbus IntegrationStart with one cold room and enough sensors to cover its warmest corners and its door. Confirm battery and signal alerts before adding rooms.
BACnet and Modbus both run buildings and plants, but they model data differently. Compare their networks, discovery and addressing, and see where each fits.
Read the GuideLearn why Malaysia uses the AS923 LoRaWAN plan, what to confirm with suppliers before you buy gateways and sensors, and how airtime limits battery life.
Read the GuideA Modbus reading is only as good as its register map. Learn the 40001 address offset, word order and scaling mistakes that give plausible but wrong values.
Read the GuideIt depends on the model and how often it reports. Report less often to extend life, and let IoTServa alert on battery level in good time.
Yes, with a door contact sensor and a rule on how long it stays open.
Tell us which protocols are on site. We will scope a pilot that reads your real devices.