Room Status at a Glance
Temperature, setpoint and occupancy hints for every room, by floor and building.
KNX rooms, BACnet plant and Modbus meters across towers, wings and campuses. IoTServa summarizes them by building, floor and room for the people who run them.

Hospitality and campus operators manage hundreds of rooms across several buildings, each with its own controllers. Knowing which rooms are occupied, which are overcooled and which plant serves them takes several tools.
Temperature, setpoint and occupancy hints for every room, by floor and building.
Plant and room data together show where energy is spent on empty rooms.
Sites, buildings, floors and rooms organise the data the way the estate is run.
Engineers see room and plant faults together before a guest or tenant complains.
Each one is read natively and joins the same tag model.
Listen to KNX group telegrams over KNX IP, map group addresses from your ETS project, and control rooms from one place.
See KNX IntegrationRead lamp and driver failures, energy, operating hours and emergency test results from DALI lighting through a DALI gateway or controller, in the same tag model as the rest of the building.
See DALI IntegrationRead chillers, air handlers and VAV boxes over BACnet/IP and BACnet MS/TP, with COV subscriptions so changes arrive when they happen.
See BACnet IntegrationPoll Modbus RTU and Modbus TCP devices, decode registers with the right word order and scaling, and publish clean engineering values.
See Modbus IntegrationScan advertisements and read GATT services through BLE gateways, to track assets, rooms and short-range sensors.
See BLE IntegrationStart with one floor of rooms and the plant that serves it. Import the ETS project first so KNX group addresses arrive named.
BACnet and Modbus both run buildings and plants, but they model data differently. Compare their networks, discovery and addressing, and see where each fits.
Read the GuideKNX controls rooms and BACnet controls plant. See how group addresses differ from BACnet objects, how each is secured, and why hotels and offices run both.
Read the GuideA Modbus reading is only as good as its register map. Learn the 40001 address offset, word order and scaling mistakes that give plausible but wrong values.
Read the GuideIt is strongly recommended. The ETS export is what turns group addresses into named, typed points.
No. IoTServa is an operations tool. Guest-facing controls remain on the existing room systems.
Tell us which protocols are on site. We will scope a pilot that reads your real devices.