IoTServa Get Started
Protocol Support

BLE Integration

Scan advertisements and read GATT services through BLE gateways, to track assets, rooms and short-range sensors.

Standard
Bluetooth Low Energy (Bluetooth SIG)
Medium
2.4 GHz radio to a BLE gateway, then IP backhaul
Topology
Advertisers and scanners, or connected peripherals
Data Model
Advertising data, or GATT services and characteristics
A small round white Bluetooth Low Energy beacon tag on a metal warehouse shelf bracket

What BLE Is

Bluetooth Low Energy is the short-range radio built into phones and countless small sensors. A device either broadcasts advertisements that any nearby scanner can hear, or accepts a connection and exposes GATT characteristics. A BLE gateway sits in the room, listens, and forwards what it hears so a signal strength or a reading becomes data.

Native Address

Gateway BG-3, room 4
MAC AC:23:3F:...
GATT 0x181A, 0x2A6E
RSSI -67 dBm

Node

Warehouse > Rack 12 > Shelf Temperature

19.8°C

How IoTServa Connects BLE

Scan Advertisements

Collect beacon and sensor advertisements from gateways, filtered by device address, name or service.

Read GATT Characteristics

Connect through a gateway and read standard services such as environmental sensing and battery level.

Presence and Proximity

Use signal strength from several gateways to tell which room an asset or tag is in.

Reduce the Noise

Drop duplicates and unknown devices at the gateway so only meaningful readings travel upstream.

Typical Jobs

  • Asset and equipment tagging
  • Room-level presence and occupancy hints
  • Short-range environmental sensors
  • Commissioning and maintenance checks

Plan for These

  • Radio range depends on walls and metal. Position gateways by testing, not by floor plan alone.

  • Advertising data is public. Do not put sensitive information in a broadcast.

  • Phones and many tags use random addresses, which changes how you identify a device.

Works Alongside the Others

A site rarely runs a single protocol. The same project can read all eight.

BLE Questions

Does IoTServa connect to BLE devices directly?

It works through BLE gateways in your premises, which scan and forward data over IP. The gateway listens to advertisements or connects to a device to read GATT characteristics, and IoTServa then applies the same tag model, history and alerts as for every other protocol.

Can IoTServa locate assets with BLE?

It can estimate which gateway or room a tag is nearest to from signal strength seen by several gateways. It does not claim metre-level positioning, because walls, metal and people change signal strength, so treat the result as room-level presence rather than exact coordinates.

What is the difference between BLE and Bluetooth Classic?

Bluetooth Low Energy is a separate radio mode designed for small, infrequent data and long battery life, using advertisements and GATT services. Bluetooth Classic streams continuous data such as audio. They are not interchangeable, and a BLE sensor needs a BLE gateway or receiver, not a Classic one.

Bring Your BLE Devices. We Will Read Them.

Tell us the make and model of what is on site. We will scope a pilot against your real equipment.

WhatsApp